16
RQT8038
Sound adjustment
External unit
Connecting external unitConnecting external unit
Preparation
• Make sure that the power supply for all components has
been turned off before making any connections.
• For details, refer to the operating instructions of the unit
which is to be connected.
• All peripheral components and cables sold separately.
Connecting analog equipmentConnecting analog equipment
This example shows how to connect an analog player with a
PHONO OUT/LINE OUT switch.
When units other than those described are to be connected,
please consult your dealer.
AUX
R L
(R)
(L)
“LINE OUT”
position
Analog player (not included) Rear panel of this unit
• An analog player with a built-in phono equalizer can be
connected.
• Set the switch to the “LINE OUT” position at the back of the analog
player.
Playing or recording from an external Playing or recording from an external
unitunit
1
Press [AUX].
2
For listening: Proceed to step 3.
For recording: Press [¶REC/8] to start recording.
3
Start playback from the external source. (For details,
refer to the external unit’s instruction manual.)
Selecting sound effectsSelecting sound effects
You can change the sound effect by selecting Preset EQ or
adjusting the bass or treble effect.
Preset EQPreset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY
→
CLEAR
→
SOFT
→
VOCAL
→
OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
OFF No effect
Bass or trebleBass or treble
Enable you to enjoy the lower or higher pitch sound.
1
Press [BASS/TREBLE] repeatedly to select your
desired setting.
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2
Press [∞] or [5] to adjust the level.
OR
To select bass or treble using the main unit:
1
Press [BASS] or [TREBLE] to select your desired
setting.
2
Press [ –] or [+] to adjust the level.
•
The tone level can be varied within –3 to +3.
Enhancing the bassEnhancing the bass
Enable you to enjoy the powerful bass effect.
Press [H.BASS] repeatedly to select your desired setting.
LEVEL1
→
LEVEL2
→
OFF
Note
The actual effect depends on the disc.
Enjoying surround soundEnjoying surround sound
Enable you to add natural width and depth to the stereo
sound.
To activate
Press [SURROUND] to display “
” indicator.
To cancel
Press [SURROUND] again to clear “ ” indicator.
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
PM41_8038-2P.indd 16PM41_8038-2P.indd 16 2/22/05 5:25:21 PM2/22/05 5:25:21 PM
