RQT9778
7
Control reference guide
1 Standby/on switch (Í/I)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
2 Adjust the volume of this system
3 Select the input source
“TV”---------#“BD/DVD”---------#“AUX1”
^-- “”(- “AUX3”(- “AUX2”(}
4 Input selector indicators
§1
A Bluetooth
®
indicator
Lights blue when the Bluetooth
®
device is
the audio source
B TV indicator
Lights green when the TV is the audio
source
C BD/DVD indicator
Lights amber when the device connected
to the BD/DVD terminal is the audio
source
D AUX1 indicator
Lights amber when the device connected
to the AUX1 terminal is the audio source
E AUX2 indicator
Lights amber when the device connected
to the AUX2 terminal is the audio source
F AUX3 indicator
Lights amber when the device connected
to the AUX3 terminal is the audio source
5 Sound mode indicators
§1
G STANDARD indicator
Lights when STANDARD is the current
sound mode
H STADIUM indicator
§2
Lights when STADIUM is the current
sound mode
I MUSIC indicator
§2
Lights when MUSIC is the current sound
mode
J CINEMA indicator
Lights when CINEMA is the current sound
mode
K NEWS indicator
Lights when NEWS is the current sound
mode
L STEREO indicator
Lights when STEREO is the current sound
mode
6 Remote control signal sensor (> 9)
7 WIRELESS LINK indicator (> 29)
§1 The indicators will also blink in various conditions. (> 40)
§2 The indicator blinks for 5 sec when the main unit detects an audio format.
To manually verify the current audio format and the corresponding indicators, refer to page 33
(Audio format indicator).
This system (Front)
Main unit
Active subwoofer
SC-HTB770PPC_RQT9778-1P_mst.book Page 7 Tuesday, January 29, 2013 11:33 AM
