46
Applicable input signals
Video signals (VIDEO, S-VIDEO)
Signal name
Horizontal Vertical
frequency (kHz) frequency (Hz)
1 NTSC 15.73 59.94
2 PAL 15.63 50.00
3 PAL60 15.73 59.94
4 SECAM 15.63 50.00
5 NTSC 4.43 15.73 59.94
6 PAL N 15.63 50.00
7 PAL M 15.73 59.94
This function allows you to reset the unit to the factory setting.
Shipping condition
1
4
Press to display the SET UP menu.
Press to select “OSD LANGUAGE”.
Press for more than 3 seconds.
Press to select “Shipping”.
Press to display the Shipping menu.
Press to select “YES”.
Press to confi rm.
[from the unit]
1 Press the MENU button till the SET UP menu is displayed.
2 Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.
3 Press and hold the ENTER button till the Shipping menu is displayed.
4 Press the Volume Up “+” or Down “–” button to select “YES”.
5 Press the ENTER button and wait for 10 sec.
2
3
Options
Shipping
Shipping
YES NO
1/2
SIGNAL
INPUT LABEL
WOBBLING
SET UP
OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
STANDBY SAVE
OFF
(
SERIAL
)
ECO
OFF
OSD LANGUAGE ENGLISH
(
US
)
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
*Mark: Applicable input signal
Signal name
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
COMPONENT IN
(Dot clock (MHz))
DVI-D IN
(Dot clock (MHz))
HDMI1
HDMI2
1 525(480)/60i 15.73 59.94 * (13.5) * (27.0)
*
2 525(480)/60p 31.47 59.94 * (27.0)
* (27.0) *
3 625(575)/50i 15.63 50.00 * (13.5)
4 625(576)/50i 15.63 50.00 * (27.0)
*
5 625(575)/50p 31.25 50.00 * (27.0) *
6 625(576)/50p 31.25 50.00
* (27.0) *
7 750(720)/60p 45.00 60.00 * (74.25)
* (74.25) *
8 750(720)/50p 37.50 50.00 * (74.25)
* (74.25) *
9 1,125(1,080)/60p 67.50 60.00 * (148.5)
∗
1
* (148.5) *
10 1,125(1,080)/60i 33.75 60.00 * (74.25)
∗
1
* (74.25) *
11 1,125(1,080)/50p 56.25 50.00 * (148.5)
∗
1
* (148.5) *
12 1,125(1,080)/50i 28.13 50.00 * (74.25)
∗
1
* (74.25)
*
13
1,125(1,080)/24sF
27.00 48.00 * (74.25)
∗
2
14 1,125(1,080)/30p 33.75 30.00 * (74.25)
∗
1
* (74.25) *
15 1,125(1,080)/25p 28.13 25.00 * (74.25)
∗
1
* (74.25) *
16 1,125(1,080)/24p 27.00 24.00 * (74.25)
∗
1
* (74.25) *
∗
1:
Based on SMPTE 274M standard.
∗
2:
Based on SMPTE RP211 standard.
Component signals
