SCREENSAVER
START
MODE
SAVER DURATION
SHOW DURATION
INTERVAL
12 : 00
3 : 00
SCREENSAVER
START
MODE
SCREENSAVER DURATION
STANDBY AFTER SCR SAVER
6 : 15
2
1
3
1/2
SIGNAL
INPUT LABEL
ECO MODE SETTINGS
WOBBLING
SET UP
OFF
COMPONENT/RGB-IN SELECT
RGB
SCREENSAVER
NO ACTIVITY POWER OFF
DISABLE
OSD LANGUAGE ENGLISH
(
US
)
28
SCREENSAVER (For preventing image retention)
Setup of SCREENSAVER Time
After selecting INTERVAL or STANDBY AFTER SCR SAVER, the relevant Time Setup will become available for selection
and the Operating Time may be set. (Time cannot be set when “MODE” is “ON” or “OFF”.)
Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour
of image.
Press to select SHOW DURATION / SAVER DURATION (When
INTERVAL is selected).
Press to select SCREENSAVER DURATION (When STANDBY
AFTER SCR SAVER is selected).
Press to setup.
button: Forward
button: Back
Notes:
• Pressing “ ” or “ ” button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing “ ” or “ ” button continuously changes the Time by 15 minutes.
• “SCREENSAVER DURATION” of the “STANDBY AFTER SCR SAVER” can
be set from 0:00 to 23:59. When this is set to “0:00”, “STANDBY AFTER SCR
SAVER” will not be activated.
Press to display the SET UP menu.
Press to select “WOBBLING”.
Press to select “ON” or “OFF”.
ON: Shifts the position of the display image on a fi xed time
interval.
Press to exit from adjust mode.
Notes:
• If “MULTI DISPLAY SETUP” is set to “ON”, this function does not operate.
• When this function is operating, part of the screen may appear to be missing.
WOBBLING
