XGA MODE
1024
×768
NOISE REDUCTION
OFF
37
SET UP for Input Signals
XGA MODE
This menu is displayed when the PC IN input signal is selected.
This menu sets two types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates
(1,024 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 60Hz
XGA input signal irrespective of this setting.
Press to select “XGA MODE”.
Press to select “1024×768”, “1366×768”.
Note:
After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as
necessary. (see page 22)
Note:
NOISE REDUCTION can be adjusted while a Component signal from PC IN terminal is being applied.
NOISE REDUCTION
Press to select “NOISE REDUCTION”.
Press to select “OFF”, “AUTO”, “MIN”, “MID”, “MAX”.
AUTO: NOISE REDUCTION will be automatically
selected from “MIN”, “MID” or “MAX”.
SYNC
SIGNAL
[
RGB
]
3 : 2 PULLDOWN
XGA MODE
AUTO
OFF
1024
×768
This function operates only during input from PC IN terminal.
SYNC
Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).
AUTO:
The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.
However, the synchronized signal that is input fi rst is selected.
ON G:
Uses a synchronized signal on the Video G signal, which is input from the G connector.
Press to select the “SYNC”.
Press to adjust.
