- 166 -
Proxy Port:
This number is also specified by the provider with the proxy address.
1) Select Proxy Port with
/ .
2) Enter the number with Numeric buttons.
3) Press BACK/RETURN to store.
4. Select Network Status with
/ and press OK to access.
Network > Network settings > Network Status
5. Select Exit with / and press OK to set.
= Note =
●
When the network connection type is set to Wired, Wireless is deactivated.
Custom - Wireless Access Point
You can use the TV as a wireless access point and connect the network
equipment without an access point.
●
Confirm the PIN code, network settings of the equipment before starting
setup. For details, read the manual of the equipment.
1. Display the menu with MENU.
2. Select Network > Network Connection > Custom > Wireless Access Point
with
/ / / and press OK to access.
3. Select Connect to device in WPS with
/ and press OK to access.
●
To set manually, select Change settings (see below).
4. Select and set WPS(Push button) / WPS(PIN) with
/ and press OK to
access.
WPS(Push button):
Set up the equipment for WPS(Push button). For details, read the
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
●
If the connection has failed, check the settings and positions of the
equipment. And then, follow the on-screen instructions.
