16
Video
Signal system: PAL / NTSC
Composite video output: 1 Vpp ~ 75 ohm
Component video output: 0.7 Vpp ~ 75 ohm
Audio
Analog stereo output
Signal to noise ratio (1 kHz): > 90 dB
(A-weighted)
Dynamic Range (1 kHz): > 80 dB (A-weighted)
Crosstalk (1 kHz): > 80 dB
Distortion/noise: (1 kHz): > 70 dB
MPEG MP3: MPEG Audio L3
Digital output
Coaxial
Main Unit
Dimensions (w x h x d): 260 x 55 x 220 (mm)
Net Weight: 1.40 kg
Power
Power supply rating: 230V, 50HZ
Power consumption: < 10 W
Power consumption in standby mode: < 1 W
Accessories supplied
Remote control and batteries
Audio/Video cables
User Manual
/DVHUVSHFLÀFDWLRQ
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
Wave length: 655 nm (DVD), 790 nm (CD)
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
Beam divergence: 60 degrees
7 Additional information
Update software
For software updates, check the current software
version of this product to compare with the latest
software (if available) at the Philips website.
Caution
Power supply must not be interrupted during software
upgrade.
Press SETUP.
2 Select [Preferences] > >9HUVLRQ,QIR@, and
then press OK.
3 :ULWHGRZQWKHÀOHQDPHDQGWKHQSUHVV
SETUP to exit the menu.
Visit www.philips.com/support to check for
WKHODWHVWVRIWZDUHYHUVLRQXVLQJWKHÀOHQDPH
for this product.
5 Refer to the upgrade instructions on the
website for more information.
Note
Disconnect the power cord for a few seconds and
connect again to turn on the product.
Care
Caution
Never use solvents such as benzene, thinner, cleaners
available commercially, or anti-static sprays intended
for discs.
Clean discs
:LSHWKHGLVFZLWKDPLFURÀEUHFOHDQLQJFORWKIURP
the centre to the edge in a straight line movement.
6SHFLÀFDWLRQV
Note
6SHFLÀFDWLRQDQGGHVLJQDUHVXEMHFWWRFKDQJHZLWKRXW
notice
EN
