A SERVICE OF

logo

Open as PDF
next previous
21
Sound
No audio output from the TV.
Ensure that the audio cables are •
connected to the audio input of the TV.
Assign the audio input of the TV to the •
corresponding video input. See the TV
user manual for details.
No audio output from the loudspeakers of
the audio device (stereo system/amplier/
receiver).
Ensure that the audio cables are •
connected to the audio input of the audio
device.
Turn on the audio device to its correct •
audio input source.
No sound during DivX video playback
The audio codec may not be supported •
by this product.
Play
DivX video les cannot be played.
EnsurethattheDivXvideoleis •
complete.
Ensurethatthelenameextensionis •
correct.
The aspect ratio of the screen is not aligned
with the TV display setting.
Theaspectratioisxedonthedisc.•
DivX subtitles are not displayed correctly.
Ensurethatthesubtitlelenameisthe •
sameasthemovielename.
Select the correct character set. •
Press • SETUP.
Select • [Language]>[DivX Subtitle]
in the menu.
Select the character set that •
supports the subtitle.
8 Troubleshooting
Warning
Risk of electric shock. Never remove the •
casing of the product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, register your product
and get support at www.philips.com/welcome.
If you contact Philips, you will be asked for the
model and serial number of your product. The
model number and serial number are on the
back of your product. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Main unit
The buttons on this unit do not work.
Disconnect this product from the power •
outlet for a few minutes, then connect
again.
No reaction to the remote control.
Connect this product to the power •
outlet.
Point the remote control at the IR sensor •
located on the front panel of this product.
Insert the batteries correctly.•
Insert new batteries in the remote •
control.
Picture
No picture.
See the TVs user manual on how to •
select the correct input on the TV.
Change the TV channel until you see the
Philips screen.
English
EN