34 Messages
Error messages during connections are mainly due to
incorrect parameters: contact your operator if needed
before first use, in order to have the correct settings.
Network
access
To select the type of network used
when launching a connection, and to
configure the corresponding settings.
Bearer
•
GSM
or
GPRS
: your mobile will only
use the GSM or the GPRS network
for e-mail connections.
•
GPRS first
: your mobile will first try
to connect to the GPRS network,
then to the GSM network if the
GPRS network isn’t available.
Selecting this option you need to have
both GSM and GPRS settings
configured.
GSM Settings
To change the GSM settings:
• Login & Password,
• Phone number (ISDN or Analogic)
needed to establish the connection
and provided by your operator,
• Auto disconnect, a value of over 30
seconds after which the phone
disconnects automatically (if a
connection was in progress).
The lack of exchanges with the network
defines the inactivity time period
leading to auto disconnection.
GPRS settings
To change the GPRS settings (same
fields as the GSM settings). The APN
menu lets you enter the address of the
external network you will connect to.
