3 – FVIC Configuration and Monitoring Features
D000003-006 Rev. A 3-21
Q
7. Click Next. Step 2 of the Map Configuration Wizard is displayed
Figure 3-39. Map Configuration Wizard - Step 2
8. Choose a Target from the drop-down list.
9. Enter a Host LUN number. Host LUNs are numbered from 0 through n.
10. Enter a Target LUN number. Target LUNs are numbered from 0 through n.
11. Click Finish.
NOTE: If the user chooses a Direct mapping, Steps 9 and 10 of the above
procedure would be omitted. A Direct map is essentially an Explicit map
with a single row containing Host LUN 0 and Target LUN 0.
3.3.4.1
Deleting a Configured Map
NOTE: A map can be deleted or deactivated only if there are no active sessions
associated with it.
To delete a configured initiator to target map, perform the following steps:
1. In the main status and navigation area, click on a FVIC.
2. From the FVIC menu, click on Configuration.
3. Click on SRP Map Configuration. The SRP Initiator Map Configuration
window is displayed.
