25
RESETTING THE VCR’S
MEMORY
You can erase all settings (including the time,
local channels, and programmed events) at
any time. Eject any loaded tape, then hold
down
PLAY
and
CHANNEL
s
on the VCR for
about 5 seconds until it turns itself off. All set-
tings are cleared.
The next time you turn on the VCR, it performs
its initial setup sequence. See “Setting the On-
Screen Language/Connection Type/Remote
Code/Clock” on Page 14.
TURNING THE ERROR BEEP
ON/OFF
Your VCR is preset to sound a beep through
your TV when you enter invalid or incomplete
information. However, you can turn the beep
off or on at any time.
Follow these steps to turn off the beep.
1. Press
MENU/ACTION
to display the main
menu.
2. If necessary, repeatedly press or
to
highlight
SET
UP
VCR
, then press
FAST-F
.
3. Repeatedly press
PLAY
or
STOP
to high-
light
BEEPER
. Then press
FAST-F
to select
OFF
.
4. Press
MENU/ACTION
twice to exit.
To turn the beep on again, repeat these steps
and select
ON
in Step 3.
:
O
N
:
O
N
CK
:
O
N
KEY
CR
-
-
-
-
-
-
16-635.fm Page 25 Wednesday, July 21, 1999 9:03 AM