A SERVICE OF

logo

49
.
Remote control buttons do
not work when the power is
on and a cassette is loaded
(continued)
Bright light is shining on the VCR’s remote control sensor window.
Block the light source, get closer to the VCR, or change the VCR’s
location.
The remote control might be set for another device’s operation.
Try pressing
VCR
.
The remote control’s batteries might be weak. Replace the batter-
ies.
Cannot see broadcast TV
programs using the VCR’s
tuner.
TV/VCR
is not set correctly. Repeatedly press
TV/VCR
until VCR
appears.
Audio/video connections are incorrect. Check all connections.
Cannot record from the input
jacks.
Connections are incorrect. Check all connections.
INPUT
is not set correctly. Select
LINE
1
or
LINE
2
.
No stereo sound for a stereo
recording.
You have not connected the VCR’s
R-AUDIO-L
OUT
jacks to a ste-
reo system or stereo TV. Connect the jacks to a stereo output.
The audio out setting is not correctly set. Set it to
Hi-Fi
(see “Re-
ceiving/Recording Stereo/SAP Broadcasts” on Page 39).
The VCR might not have adjusted tracking correctly. You might
need to manually adjust tracking (see “Tracking” on Page 30).
PROBLEM POSSIBLE SOLUTION
16-635.fm Page 49 Wednesday, July 21, 1999 9:03 AM