35
11. Tiering with Dominion KX II
Dominion KX II is an enterprise-class, secure, digital KVM switch that provides
access and control of servers from anywhere in the world via a web browser. With
Dominion KX II, you can have the EZswitch system remotely accessed over a
TCP/IP network through the use of a web browser.
11.1. Connect EZswitch to Dominion KX II
A. Connect a Dominion Computer Interface Module (CIM) to the video and PS/2
or USB ports on the rear panel of the EZswitch KVM switch.
Note: You can use any Dominion CIM except for DCIM-VUSB.
B. Connect one end of a UTP (Cat5/5e/6) cable to the CIM and the other end of
the cable to one of available server ports on the Dominion KX II KVM switch.
Figure 41: Integration of EZswitch and Dominion KX II
EZswitch
Dominion CIM
UTP (Cat5/5e/6) cable
Dominion KX II
11.2. Configure Dominion KX II
You must configure Dominion KX II for use of hot key sequences to switch between
channels of the EZswitch KVM switch.
A. Log in to the Dominion KX II.
For instructions, see the Dominion KX II User Guide, which can be downloaded
from Raritan’s website (www.raritan.com).
B. Choose Device Settings > Port Configuration. The Port Configuration page
opens.
