2524
Anonymous call
Anonymous call, also known as Caller ID restriction, allows a user to request the
network to hide their identity when they are performing outgoing calls.
The IP110 supports Permanent Caller ID restriction, meaning that while enabled
all calls will request to be anonymous and the user will need to disable the feature
if they want their identity to be transmitted. This service can be performed locally
or by sending an activation code to the network, depending on your network.
Additionally the IP110 allows users to automatically reject anonymous incoming
calls.
These services can be managed through both phone and Web interfaces.
To set Anonymous call via phone interface:
1) Press MENU/BACK[2. FEATURES [4. ANONYM CALL to enter the congura-
tion page. ( if the active user type is admin or var , press MENU/BACK [
2. FEATURES[6. ANONYM CALL )
2) Use LEFT or RIGHT navigation keys to select the account to be anonymous.
3) Press DOWN navigation key to display “Block CID”, then press LEFT or RIGHT
navigation keys to enable/disable the anonymous call function.
4) If you want to perform this function locally, press OK to save your changes.
5) If your user type is admin and you would like to activate this function in your
service provider please press DOWN key and enter the Anonym On Code and Ano-
nym O Code. Whenever you enable/disable the anonymous call function on your
phone, it will automatically send these codes to the server.
6) Press OK to save your changes, or MENU to cancel.
Send Key conguration
Admin can set a specic button (“#” or “*”) as the send key. If this feature is
enabled, once you’ve dialed the desired number, you can press this send key to call
your correspondent immediately.
To set the send key via the IP phone interface:
1) Make sure active User Type is admin or var.
2) Press MENU/BACK [ 2. FEATURES[ 4. SEND Key to enter the conguration page.
3) Press the LEFT/RIGHT navigation keys to choose a button that you want to use
as the send key: “#”, “*”, or disable this option. Note that currently active option
has an “*” on the left.
4) Press the OK button to save the changes, or MENU to cancel.
Hot Line
Hot Line allows your phone to dial a number automatically if it has been o hook
for a specied time period and no keys have been pressed. Both destination num-
ber and timeout can be congured.
The service is enabled if Hot Line Number has been congured.
To set the hot line number via the IP phone interface:
Press MENU/BACK[2. FEATURES [3. HOT LINE to enter the conguration page.
( if the active user type is admin or var , press MENU/BACK [2. FEATURES [5.
HOT LINE )
Enter the hot line number and press UP or DOWN navigation key to select HotLine
Delay. Set the Hot Line Delay (default is 4 seconds), then press the OK button to
save the changes.
1. Send Key:
<*# >
