Recording While You’re Away (VCR Plus+ Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to
eight different programs within a one year period. Before using VCR Plus+ to record a
program, make sure that:
* Cable box set up has been completed if you use a cable box.
* VCR Plus+ set up has been completed.
* The clock is set correctly.
. A tape with safety tab has been inserted with enough tape to record the programs.
* The remote is set to control the VCR- using VCR1 (VCR2).
Setting a VCR Plus+ Recording
1.
2.
3.
4.
5.
6.
7.
8.
9,
10
Press PROGNCR+ on the remote to display the
VCR
MAIN MENU on
the TV screen.
Press 1 to display the
VCR PLUS menu.
Press
numbers on the remote to enter the PlusCode
number for the program you want to record.
Press
CLEAR to correct an entry.
Press PROGNCR+ to enter the
program.
If the VCR does not recognize the PlusCode number,
UNRECOGNIZED NUMBER PLEASE RE-ENTER OR
PRESS PROGRAM TO PROCEED
appears on the TV
screen. Check your number
and enter
it again.
Press
1,2, or 3 to select type of
program.
1
ONE-TIME PROGRAM-single
program.
2 DAILY PROGRAM -Monday
through Friday.
3
WEEKLY PROGRAM - same
program once a week.
A screen appears verifying the channel, time on, time off,
and date of the recording.
Select a recording speed by pressing
SPEED on the
remote.
Press PROGNCR+ to enter your program. A reminder
appears which will time out or you can press
PROGNCR+ to F&XII to the VCR PLUS menu.
PROGRAMS OVERLAP may
appear on the screen if you
entered hvo programs where the times overlap.
See page 23
to clear a pmgmm.
Repeat steps Z-6 for additional programs or press
PAOGNCR+ to remove the menu from the TV screen.
Turn off the VCR
before recording time.
TIMER
should appear in the VCR’s display panel.
If using a cable box, leave it turned on and hmed to the
channel you want to record.
22
lln
I
