51
GB
50
GB
Setting Up the DVD Setup Menu
1 With the unit in Stop mode, press the SETUP button on the remote.
Result
: The MAIN MENU is displayed.
2 Press the corresponding
$
,
❷
buttons to select the DVD Setup
option.
3 Press the ENTER button to select this option.
4 Use the
$
or
❷
buttons to select the desired item. Then press the
➛
or
❿
buttons.
• Digital Output
PCM : Converts to PCM(2CH) audio.Select PCM when
using the Analog Audio Outputs.
Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
NOTE : Be sure to select the correct Digital Output or no
audio will be heard.
• DTS
Off : Doesn’t output digital signal.
On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
• Dynamic Compression
On : To select dynamic compression..
Off : To select the standard range.
• TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
DVD
Setting Up the Parental Control
Rating Control is a password protected system that allows you to
block playback of DVDs based on their content. The system uses an
eight level rating system.
• If you try to play a DVD that exceeds the selected rating, an error
message will appear.
• Not all discs are rated.
1 Open “SETUP MENU”
With the DVD in stop mode, press the SETUP button.
2 Select “Parental”
Using the up and down buttons, move the selection cursor to
“Parental,” then press ENTER to select.
3 Select “Use Password”
Move the selection arrow to “Use Password,” then press the
right/left button to select from the following options:
• Off - Indicates that no password is required to view any DVD
disc or to change Rating Control options. No additional Rating
Control settings are necessary.
• On – Indicates that a password is required to view some DVD
discs and to view Rating Control options. The menu will change
as shown.
NOTES:
• The first time “Enter Password” is set to “On,” you will be
prompted to enter a password.
• If the “Enter Password” screen appears, then “Re-enter
Password” has already been set to “Yes.” Please skip to Step 5.
4 Enter Password
Enter a 4-digit password using the 0–9 buttons on the remote
control.
• Write your password down, and keep it in a safe place in case
you need it to change your settings later.
5 Select “Rating Level”
Move the selection bar to “Rating Level,” then press ENTER to
select.
6 Change Rating Level
Use the up/down buttons to select one of the following ratings:
• Level 8 Adult • Level 4
• Level 7 • Level 3
• Level 6 • Level 2
• Level 5 • Level 1 Kids Safe
All ratings above the level you select will also be blocked, e.g., if
you block Level 6, then Levels 7 and 8 will also be blocked.
Press ENTER to confirm your selection.
• If you forgot your password, press power on from a cold start
with no disc in the unit. Press the REW and F.F buttons
simultaneously on the front panel for 5 seconds.
DVD
