214
Contents
Chapter Contents
When the target camera has
been added successfully, the
image transfer screen will be
displayed. Proceed to “Sending
Images” (=
230).
• After you have accessed the Wi-Fi menu once, you can access
it again by pressing the <o> button. The recent target device
islistedrst,soyoucaneasilyconnectagainbypressingthe
<o><p> buttons to choose it. To add a new device, display the
device selection screen by pressing the <q><r> buttons, and then
congurethesetting.
If you prefer not to display recent target devices, press the
<n> button, and on the [3] tab, choose [Wi-Fi Settings] >
[Target History] > [Off].
• To add multiple cameras, repeat the above procedures starting from
step 1.
• Once a camera is added, the camera nickname will be displayed on
the screen in step 3. To connect to a camera again, simply choose
the camera nickname from the list.
