4746
Placing a call using voice dialing.
To place a call using voice dialing:
1. Press and hold , or open the flip, depending
on the setting.
2. At the voice prompt,say the name into the
phone.
The phone places the call if it recognizes the
name.
If the phone does not recognize the name,it
prompts for the name again.
If the phone is unable to recognize the name
after two attempts,the following message dis-
plays:“Cannot recognize name.Please check
name.” The phone returns to Standby mode
automatically, and you can try the call again later.
Reviewing voice dialing entries.
To review voice dialing entries:
1. Press to display the Main Menu.
2. Press for Voice Dial.
3. Press for Review.A list of entries displays.
4. Press the digit key to select the desired entry, or
press the scroll keys to scan entries.The record-
ed names play audibly as you scroll through the
list.
5. Press to return to the previous screen.
¤
¤
¤
Voice dialing activation.
Voice dialing is always active once you have
programmed the phone to accept voice dialing
entries.To place voice dialing calls,press and hold
.Then say the name into the phone after you
hear the voice prompt and the beep.
You can also initiate a voice dialing call by opening
the flip, when you select this option through the
Main Menu.
To change voice dialing setup options:
1. Press to display the Main Menu.
2. Press for Voice Dial.
3. Press for Set Active.
4. Press the scroll keys to toggle between options:
Send Only:Enables voice dialing by pressing and
holding .
Send or Flip: Enables voice dialing by pressing
and
holding , or by opening the flip.
5. When the desired option displays,press to
save the setting.
¤
¤
