6362
Storing pauses in an Internal Phone Book
entry.
To store a number in your Internal Phone Book that
contains pauses:
1. Enter the phone number you want to connect to
(such as the bank’s teleservice phone number).
2. Press . More options display. Press or
to enter the desired pause:
Press to enter a Hard Pause.The letter “p”
displays in the number, meaning that a hard
pause will occur at that point in the dialing
sequence.Enter the digits that need to follow the
pause (such as your account number).
Press to enter a 2 second pause.The letter
“T”displays in the number, meaning that a
“Timed”pause will occur at that point in the dial-
ing sequence.Enter the digits that need to follow
the pause (such as your account number).
3. Store the number as you normally would by
pressing the key and entering a name.
Pause dialing from a stored Internal
Phone Book entry.
Dialing from the Internal Phone Book is easy:
1. If you stored the number using a 2 second
pause(s), simply dial the number as you normally
would,and you are finished.The phone transmits
the number that follows the “T”pause two sec-
onds after connection.“Tpause”displays when
you dial the number.
2. If you stored the number using a hard pause(s),
then dial the teleservice number and wait to be
¤
¤
Advanced Internal Phone
Book features.
Pause Dialing.
When you call automated systems (like banking
services),you are often required to enter a password
or account number. Instead of entering the numbers
manually each time, you can store the numbers in
your Internal Phone Book, separated by special char-
acters called pauses.
There are two kinds of pauses that can be entered on
your phone:
Hard pause - A hard pause stops the dialing
sequence until you press the button.
2sec pause - A 2sec pause stops the dialing
sequence for 2 seconds and then automatically
sends the remaining digits.
Your phone has two pause dialing methods:pause
dialing from the Internal Phone Book (see “Pause
dialing from a stored Internal Phone Book entry.”on
page 63),and manual pause dialing (see “Manual
pause dialing.”on page 64).
Note: Multiple 2 second pauses can be entered to
extend the length of a pause. For example,two
consecutive 2 second pauses cause a total pause time
of four seconds.However, keep in mind that pauses
count as digits towards the 32 digit dialing maxi-
mum.
¤
¤
