14 – 10x Network Mini Smart Dome Camera
installation
RS-485 Termination Resistor
Pin 8 is used for ON/OFF of RS-485 Termination.
Normally, it must be OFF state. Especially when
you have trouble with long Daisy chain style
connection, turn ON this termination switch of last
camera.
Pin 8 : RS-485 Termination Resistor (ON/OFF)
INSTALLATION USING SURFACE
MOUNT ON THE CEILING
SNC-C6225
1. To pass cables to upside of ceiling, please, make
about ø60mm hole on the ceiling panel.
2. Screw surface mount bracket to ceiling with
4 screws.
❖
•
–
❖
3.
Wire cables to terminal block and connect the
terminal blocks to main unit.
4.
Screw main unit to surface mount bracket with
4 lock-up screws.
5.
Detach protection vinyl from dome cover.
123456
ON
ON
78
