ENG-11
Presetting the Stations Automatically
☛
You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 8).
Your STB-DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
◆
Plug & Auto Set up (see page 8)
◆
Automatically
◆
Manually (see page 12)
You can store up to 80 stations.
1 After pressing the MENU, press the OK or
❿
.
Result: The Setup menu is displayed.
2 Press the corresponding
,
❷
buttons to select
the Install option.
3 Press the OK or
❿
to select this option.
Result: The Install menu is displayed.
4 Press the corresponding
or
❷
buttons, until the
Auto Setup is selected.
And then press the OK or
❿
to select this option.
Result:
◆
The Please Wait indication highlight on
the television screen.
◆
The first frequency band is scanned and
the first station found is displayed and
stored.
◆
The STB-DVD-VCR then searches for the
second station and so on.
◆
When the automatic scanning procedure
has finished, the STB-DVD-VCR switches
automatically to programme 1.
➢
The number of stations automatically stored by
the STB-DVD-VCR depends on the number of
stations found.
6 If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
➢
◆
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (see page
13).
