A SERVICE OF

logo

ENG-31
Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
2 Select DVD using
,
buttons, then OK or
button.
3 Select Display Setup using
,
buttons, then
press the OK or
button.
4 Use the
,
buttons to select the desired item.
Then press the OK or
button.
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box : Select when you want to see
the total 16:9 ratio screen DVD
supplies, even though you have
a TV with a 4:3 ratio screen.
Black bars will appear at the top
and bottom of the screen.
NTSC Disc Output
TV Aspect
Black Level
Display Setup
: 4:3 L-Box
: PAL 60 Hz
DVD/STB : Component
Setup
Setup
Setup :
Display Setup
STB
2. 4:3 Pan Scan : Select this for conventional size
TVs when you want to see the
central portion of the 16:9
screen. (Extreme left and right
side of movie picture will be cut
off.)
3. 16:9 Wide : You can view the full 16:9
picture on your widescreen TV.
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
NTSC if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave PAL 60Hz as is.
DVD/STB Out
Component : Sends Component signal from the
RCA JACK.
S-Video : Sends S-VIDEO signal from the AV
JACK (S-Video terminal).
Video : Sends COMPOSITE VIDEO signal
from the RCA JACK