A SERVICE OF

logo

KEYCHAIN TRANSMITTER BATTERY
The Keychain Transmitter operates on a 12 volt alkaline battery which is
installed at the factory.
There are two screws on the back of the transmitter that holds the case
together.
To replace the Keychain Transmitter battery:
1. Undo the two screws on the back
of the transmitter.
The back will then come off.
2. Using a small screwdriver or pen
knife, pry out the old battery from
one end.
3. Place the new battery in position.
A diagram beside the battery well
indicates which end is positive
and which is negative.
4. Close the battery cover and re-
insert the two screws.
28
BATTERY MAINTENANCE
-
+
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307