45
On the remote control
1 Press SOUND repeatedly to select
“SOUND 1” or “SOUND 2” appears
in the display.
Adjusting the sound quality
On the recorder
1 While the recorder is playing, press
the jog dial.
2 Turn the dial until “SOUND” flashes
in the display, and then press to enter.
3 Turn the jog dial until “SOUND 1” or
“SOUND 2” flashes in the display.
The display shows the currently
selected “T” (treble) and “B” (bass)
sound setting.
4 Select “T” or “B” flipping the bar
towards x or towards X.
You can change and adjust the item in
which the cursor is flashing.
5 Turn the jog dial to adjust the sound
level.
To move the cursor between
“T” to “B”:
Flip the bar towards x or X.
To switch “SOUND 1” and
“SOUND 2”:
Move the cursor to the top row and
then turn the jog dial.
6 Press the jog dial to enter.
The sound settings are saved and the
playback display appears again.
z
You can also use . or > to adjust the
sound level of “T” and “B” in step 5.
On the remote control
1 Press SOUND repeatedly to select
“SOUND 1” or “SOUND 2”.
2 During playback, press SOUND for 2
seconds or more.
The recorder changes to B (bass)
setting mode. Pressing the SOUND
button for 2 seconds again changes
the recorder back to T (treble) setting
mode.
SOUND 1
T-=== ==+
B-==== =+
When you adjust treble, select “T”.
When you adjust bass, select “B”.
SOUND 1
T-===== +
B-== ===+
-4 ±0+3
The cursor moves. (Position: +2)
The sound can be adjusted in 8 steps
(–4, –3, ...±0, ...+2, +3).
When you select bass-setting mode,
“B” appears. When you select treble-
setting mode, “T” appears.
continued
