Basic Operations
53
Setting the timer manually
filename[01GB05BAS-NP0.fm] model name1[SLV-SF900D/E] model name2[]
[3-062-331-
12
(1)]
Setting the timer manually
If the ShowView system is not available in
your area, follow the instructions below to set
the timer to record programmes.
Before you start
…
• Check that the VCR clock is set to the
correct time and date.
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• To record from a decoder or other source,
turn it on.
• Turn on your TV and set it to the video
channel.
• If you insert a tape with the SmartFile
function, make sure the total recording
time doesn’t overlap the protected
programme. For details about the
SmartFile function, see page 74.
• Set TIMER OPTIONS to STANDARD or
VARIABLE in the OTHER OPTIONS
menu (see page 70).
123
456
789
0
?
/
1
M/m/</
OK
x
STOP
TIMER
INPUT
SELECT
continued
