72
Connecting to a VCR or stereo system
filename[01GBedit-NP0.fm] model name1[SLV-SF900D/E] model name2[]
[3-xxx-xxx-
E1
(1)]
Tip
You can also use the LINE-3 IN connector instead.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plugs unconnected.
• If you connect your VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
• If the other VCR does not have a Scart (EURO-AV) connector, use the VMC-2106HG cable
instead and connect the cable to the line out jacks of the other VCR.
• When you connect another VCR to the DECODER/LINE3 IN connector, set DECODER/
LINE3 to LINE3 in the OTHER OPTIONS menu.
How to connect to a stereo system
Connect the LINE-2 IN AUDIO L/R jacks of your VCR to the audio output jacks on
the stereo system, using the RK-C510HG audio cable (not supplied).
