33 (US)
Press CURSOR ” to flash the minutes under “START”, then set the
minutes using CH +/– .
[ TIMER REC/PLAY ]
1 0 1 3:1 5 – –:– – – – SP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
4 Press CURSOR z, then set the time to stop recording/playing in the
same way using CH +/– .
[ TIMER REC/PLAY ]
1 0 1 3:1 5 1 4:0 0 – – SP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
5 Press CURSOR z and set the “MODE” using CH +/–.
• To record the input signals from AUDIO/VIDEO IN jacks, set the
“MODE” to AV.
• To program timer playback, set the “MODE” to PB.
[ TIMER REC/PLAY ]
1 0 1 3:1 5 1 4:0 0 A V SP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
[ TIMER REC/PLAY ]
1 0 1 3:1 5 1 4:0 0 P B
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
6 Press CURSOR z and set the tape speed (SP or EP) using CH +/–.
Refer to page 17 (US) for details on tape speeds.
Note
You cannot set the tape speed for a timer playback.
[ TIMER REC/PLAY ]
1 0 1 3:1 5 1 4:0 0 A V EP
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
– – – –:– – – –:– – – – – –
DATE START STOP MODE
To preset another timer setting, press $ to flash the date of the next
line, and repeat steps 2 to 5.
To correct settings before completing timer settings, press CURSOR
Z/z/4/$ to flash the setting you want to change, and reset it.
(continue)
