37 (US)
6 Press EXECUTE.
The VCR returns to the original screen. When there are any other timer
settings left in the TIMER REC/PLAY menu, press TIMER ON/OFF
to return to recording/playback standby.
Note
You can use TIMER on the VCR instead of TIMER ON/OFF on the
remote commander.
To check the timer settings during timer recording/playback
Press MENU and select 2. TIMER REC/PLAY SET. After checking, press
EXECUTE, and then MENU to turn off the display.
When the timer settings overlap
The VCR will not record/play overlapping programs. If any of your timer
settings overlap, change the settings.
Case 1: If you preset two programs to start recording/playing at the
same time...
The program listed first in the TIMER REC/PLAY menu has priority over
the other programs. The timer settings of lower priority programs will start
recording/playing when the VCR stops recording/playing the higher
priority program.
Case 2: If you preset program 1 to start recording/playing before
program 2 is finished recording/playing...
Program 1 will start recording/playing after program 2 has finished.
Note
The VCR starts recording 15 seconds before the preset start time.
About memory back-up function
The VCR has a memory back-up function. Even if the power is
interrupted, settings and adjustments are retained for up to 30 days using
the built-in rechargeable battery.
Program 1
(listed first )
Program 2
(listed next )
10:00
10:50
11:30
Case 1
11:00
Program 1
10:30
11:30
10:00
Case 2
Program 2
Will be
cut off
Will be
cut off
