36 Sun Blade T6300 Server Module Administration Guide • April 2007
input-device (OpenBoot configuration
variable), 17
K
keyboard sequences
L1-A, 13, 14, 16
L
L1-A keyboard sequence, 13, 14, 16
LEDs
Locator (system status LED), 21
system, interpreting, 20
Locator (system status LED)
controlling, 21
controlling from sc> prompt, 21, 22
M
manual device reconfiguration, 27
manual device unconfiguration, 27
manual system reset, 14, 16
multiple ALOM sessions, 11
N
network management port, activating, 4
O
ok prompt
about, 12
accessing through ALOM break command, 13
accessing through Break key, 13, 14
accessing through graceful system shutdown, 13
accessing through L1-A (Stop-A) keys, 13, 14
accessing through manual system reset, 13, 14
accessing via ALOM break command, 14
risks in using, 15
suspension of Solaris Operating System, 15
ways to access, 13, 15
OpenBoot commands
go,15
probe-ide,14
probe-scsi,14
probe-scsi-all,14
showenv,31
OpenBoot configuration variables
auto-boot, 12, 22
described, table, 31
input-device,17
output-device,17
system console settings, 17
OpenBoot firmware
scenarios for control, 12
operating system software, suspending, 15
output-device (OpenBoot configuration
variable), 17
P
parity, 8
patch panel, terminal server connection, 5
poweroff (sc> command), 14
poweron (sc> command), 14
probe-ide (OpenBoot command), 14
probe-scsi (OpenBoot command), 14
probe-scsi-all (OpenBoot command), 14
R
reset
manual system, 14, 16
scenarios, 24
reset (sc> command), 14
run levels
explained, 12
ok prompt and, 12
S
sc> commands
break,14
console,14
console -f,11
poweroff,14
poweron,14
reset,14
setlocator,21
showlocator,22
sc> prompt
about, 10
accessing from network management port, 12
accessing from serial management port, 12
multiple sessions, 11
system console escape sequence (#.), 12
system console, switching between, 9
ways to access, 12
serial management port (SERIAL MGT)
acceptable console device connections, 2
