A SERVICE OF

logo

Open as PDF
next previous
21
Model 428 Operating Procedures
050415
Step L - Self- Closing Door Assembly
Position the torque arm by inserting it down into the
hole on the torque rotor which protrudes from the door.
Verify proper installation by moving the torque rotor
back and forth to be sure it moves freely.
Figure 33
Proceed to Step 16.
Step 16
Slide the long drip pan into the hole in the front panel.
Figure 34
Step 17
Install the front drip tray and splash shield beneath the
door spout.
Figure 35
Step 18
With s anitized hands , or a plastic sanitized glove, lay
the air/mix feed tube (optional) in the bottom of the mix
hopper.
Figure 36