8 Setup
• Do not expose the digital receiver to any moisture. The
digital receiver is designedfor use indoors only. Use dry
cloth when cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimeter around it. For the
physical specification of the digital receiver, refer to Ta-
ble 2.2.
• Protectthe powercordfrombeing walkedonor pinched.
If wires are exposed or cord is damaged, do not use the
receiver and get cord replaced.
• Never open the digital receiver casing under any cir-
cumstances. Warranty will be void.
• Refer allservicingto anelectronicsqualifiedservice tech-
nician.
Table 2.1: Power specification
Input voltage 90 to 250VAC, 50/60Hz
Power consumption 28W at maximum in operation
9W in standby
Table 2.2: Physical specification
Size 340× 60× 265mm
Weight 2.4kg
Operating temperature 0 to 45°C
Storage relative humidity 5 to 95%
