Mode:
Specify the working mode for this router. Options include:
Client: In this mode, the device sends a request to the remote
L2TP/PPTP server initiatively for establishing a tunnel.
Server: In this mode, the router responds the request from the
remote client for establishing a tunnel.
Account Name:
Enter the account name of L2TP/PPTP tunnel.
It should be configured
identically on server and client.
Password:
Enter the password of L2TP/PPTP tunnel. It should be configured
identically on server and client.
Tunnel:
Select the network mode for the tunnel. Options include:
LAN-to-LAN: Select this option when the L2TP/PPTP client is a
LAN. The tunneling request is always initiated by a router.
Client-to-LAN: Select this option when the L2TP/PPTP client is a
single PC.
Max Connections:
Specify the maximum connections that the tunnel can support. This
item is available for Client-to-LAN tunnel type on Server mode.
WAN:
Specify the WAN port to transmit the packets. This item is available
for Client mode.
Server IP:
Enter the IP address of L2TP/PPTP server. (It’s always the WAN IP
ad
dress of the remote peer of L2TP/PPTP tunnel.) This item is
available for Client mode.
Encryption:
Specify whether to enable the encryption for the tunnel. If enabled,
the L2TP tunnel will be encrypted by IPsec, and the PPTP tunnel will
be encrypted by MPPE.
Pre-shard Key:
Enter the Pre-shared Key for IKE authentication. This item is available
for L2TP tunnel.
-92-
