11
4
STEP
• Insert the lever arm (3a) into the
triangular structure at the front of 1b.
When the holes are lined up, insert the
90mm shaft along with a flat
(17x25x1.5T) washer through the lower
end of 3a and fasten with a flat
(10.5x30x2T) washer and a bolt
(M10x1.5Px20L). Tighten firmly using
two 6mm L-shaped wrenches.
• Insert the foot plate (3b) over the top
opening of the lever arm. When the
holes are lined up, slide the 165mm
shaft through the opening and fasten
a flat (10.5x30x2T) washer and a
bolt (M10x1.5Px20L). Tighten firmly
using a 6mm L-shaped wrench.
PINK BAG
