VIVOTEK - A Leading Provider of Multimedia Communication Solutions
32 - User's Manual
4� In the Networking Services dialog box, select Universal Plug and Play then click OK�
5� Click Next in the following window�
6� Click Finish� UPnP
TM
is enabled�
► How does UPnP
TM
work?
UPnP
TM
networking technology provides automatic IP conguration and dynamic discovery of devices
added to a network. Services and capabilities offered by networked devices, such as printing and le
sharing, are available among each other without the need for cumbersome network conguration. In
the case of Network Cameras, you will see Network Camera shortcuts under My Network Places�
► Enabling UPnP port forwarding allows the Network Camera to open a secondary HTTP port on the
router-not HTTP port-meaning that you have to add the secondary HTTP port number to the Network
Camera’s public address in order to access the Network Camera from the Internet� For example, when
the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the
Network Camera’s IP address�
From the Internet In LAN
http://203.67.124.123:8080 http://192.168.4.160 or
http://192.168.4.160:8080
► If the PPPoE settings are incorrectly congured or the Internet access is not working, restore the
Network Camera to factory default; please refer to Restore on page 77 for details� After the Network
Camera is reset to factory default, it is accessible on the LAN�
