A SERVICE OF

logo

Open as PDF
next previous
VIVOTEK
User's Manual - 15
NOTE
When choosing the lens for your IP8162/62P, please notice the specications as below.
1.Flange back length (distance A-B) must be longer than 12.5mm. If the ange back
length is too short, the bottom of screw mount may hit the ICR, or result in out of focus
when adjusting the focus controller.
2.The screw mount (distance A-C) must be shorter than 4.5mm; in case that the bottom of
screw mount may hit the ICR.
3.The distance between the edge of lens (A) and front panel (D) must NOT be longer than
0.5mm; or, it may hit the front panel when adjusting the focus controller, or result in out of
focus.
0.5
sensor
A
D
A
B
A C
2 3
A (lens edge)
D (front panel)
ICR
A
C
A
B
1
NOTE: