Wavelink wlcug1020090331 Manual

A SERVICE OF

next previous

38 WavelinkCommunicator



Figure 5-1. CommunicatorConsole

2 UsingthearrowbuttonsintheMaintab,selectwhichchannelonwhich

youwanttocommunicate.

3 TobegincommunicatingyoucaneitherclicktheHandsFreebuttonor

pressandholdtheredtransmitbuttonlocated intheupper‐left.

Whenyouusetheredbuttontransmitbutton,youmustkeepthebutton

pressedwhilespeaking.Thetransmitbuttonwillchangetogreenand

indicateyoucan

speak.IfyouclickHandsFree,thelocksintotalkmode

andthebuttonswitchestoStop.

4 Beginspeakingintoyourheadset.

Duringyourtransmit,mobiledeviceusersonthesamechannelandinthe

correctnetworkzonewillbeabletoreceivethecommuni cationand 

converseback,similartoatelephone.

5 Ifthevolumeandmicrophoneaudioarenotacceptable,usetheslidersto

adjusttheaudiotoyourpreference.

6 Whenyouarefinishedcommunicatingeitherstopholdingdownthered

transmitbuttonorclickStop.