Removing the right oven door
Electrical Shock Hazard
l Make sure all controls are OFF and
the oven is cool before removing
oven door.
.The door is heavy. For safe, tempo-
rary storage, lay the door flat.
Failure to follow the above precautions
could result in electrical shock, burns,
or personal injury.
To remove the door:
1. Open the door all the way.
2. Pull up the lock located below each
hinge and push it onto the hook part of
the hinge. You may have to push down
slightly on the door to pull the locks fully
over the hooks.
3. Grasp the door by the sides, then pull
the bottom of the door up and toward you
to disconnect the hinges.
4. Keep pulling the bottom of the door
toward you while moving the top of the
door toward the range to completely
disconnect the hinges.
To replace the door:
1. Grasp the door by the sides. Set hinges
into the hinge slots.
2. Keep pushing the bottom of the door
away from you. While pushing, move
the top of the door away from the range
to correctly position the hinges.
3. Push the lock off of the hook part of the
hinge. You may have to push down on
the door to release the locks.
NOTE: Make sure the hinges are cor-
rectly positioned before unlocking them.
4. Close the door.
Hinge
Hinge
Lokk in disengaged
Lock engaged for
position
door removal
Hinge slot
(door removed
from range)
28
