Whirlpool SF31OBEG Manual

A SERVICE OF

next previous

1.

Pull the burner cap straight up from the

burner base.

2. Clean the burner cap with warm, soapy water

and a sponge. You can also clean it with a

mildly abrasive scrubbing pad or cleanser.

Do not clean the burner cap in a dishwasher or

self-cleaning oven.

3. If the gas tube opening has become soiled or

clogged, use a cotton swab or a soft cloth to

clean the area.

d,

clean them with a

straight pin. Do not

enlarge or distort the

port. Do not use a

wooden toothpick. If

the burner needs to be

adjusted, call a qualified

technician for service.

5. After cleaning the gas tube opening and ports,

Alignment

replace the burner cap.

To replace the burner

cap, make sure the

alignment pins on the

cap are properly aligned

with the burner base.

6.

Turn on the burner to see if it will light. If the

burner does not light after you have cleaned it,

recheck cap alignment or contact an autho-

rized service technician. Do not service the

sealed burner yourself.

20