ES-3100 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
108
CLI configuration of classifier and policy rule.
Please logon to the Switch by either telnet, SSH or Console.
Step into the configuration mode and put the follow commands:
Classifier 1
Switch(config)#classifier AllPort2 source-port 2
Classifier 2
Switch(config)#classifier ARP ethernet-type arp source-port 2
Classifier 3
Switch(config)#classifier Port+IP ethernet-type ip source-port 2 source-ip
172.23.3.120 mask-bits 32
Policy rule on classifier 1
Switch(config)#policy AllowARP classifier ARP vlan 1 egress-port 1 priority 0
dscp 0 tos 0 bandwidth 0 outgoing-packet-format tagged out-of-profile-dscp 0
forward-action forward
Policy rule on classifier 2
Switch(config)#policy AllowPort2IP120 classifier Port+IP vlan 1 egress-port 1
priority 0 dscp 0 tos 0 bandwidth 0 outgoing-packet-format tagged
out-of-profile-dscp 0 forward-action forward
Policy rule on classifier 3
Switch(config)#policy DropAllPort2 classifier AllPort2 vlan 1 egress-port 1
priority 0 dscp 0 tos 0 bandwidth 0 outgoing-packet-format tagged
out-of-profile-dscp 0 forward-action drop
