ES-3100 Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
51
How to configure GVRP?
Description:
In this scenario, PCs belong to different divisions within a single
corporation can not communicate with each other, and we leave some ports of
switches for GVRP-aware PC and others for VLAN-unaware PC. So network
administrator can manage and configure VLAN smartly based on different
devices and requirements. For switches on floor 1 and 2, PC connecting to
port 3 joins VLAN 10 statically; PC connecting to port 4 joins VLAN 20 statically;
and PCs connecting to port 1&2 can join VLAN 10/20/30 which determined by
its configuration on GVRP-aware NIC dynamically. For switch on basement,
PC connecting to port 1 joins VLAN 30 while PC connecting to port 3 can join
VLAN10/20/30 dynamically. Please Note: all clients connecting to switches in
this scenario should be located in the same subnet (in this example, the subnet
is 192.168.1.0/24)
How to configure this scenario:
1. For Switch A on Floor 2:
