A SERVICE OF

logo

ES-4024A Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
83
Step 3. Setup the switch A’s IP address of two interfaces for layer 3 routing
and its uplink gateway. Take ES-4024 for example.
Configure Switch A’s IP setting via GUI menu Basic Setting >> IP Setup.
- Default Gateway: 192.168.254.1
- 1st IP address: 192.168.1.6/24 with VID=1, see figure example as
below.
- 2nd IP address: 192.168.254.2/24 with VID=2
After add the change, it will become as following setting.