ES-4024A Series Switch Support Notes
All contents copyright (c) 2006 ZyXEL Communications Corporation.
89
Step 1. Here we assume that all setting are based on Scenario1’s
configuration. Therefore, we will skip the basic setting in this Scenario.
Step 2. Add one more VLAN ID on SwitchA for another subnet connecting to
ISP2.
Same as Scenario1, in this example, we assume
1. The uplink gateway, ZyWALL, which is VLAN-unaware
2. The network is very simple and we configure all ports are the member
of both VLAN1, VLAN2, and VLAN3 groups
a. Create the VLAN3 via GUI menu Advanced Application >> VLAN >>
Static VLAN, and configure all ports with “Fixed” and uncheck “Tx Tagging”.
Press Add button then. See the figure below.
Step 3. Add one more Switch A’s IP setting via GUI menu Basic Setting >> IP
Setup.
- Default Gateway: no change
- Add 3rd IP address: 192.168.253.2/24 with VID=3, see following figure
after the change.
