A SERVICE OF

logo

Open as PDF
next previous
MGS-3712/MGS-3712F User’s Guide
67
CHAPTER 6
Initial Setup Example
This chapter shows how to set up the Switch for an example network.
6.1 Overview
The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address
6.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs.
You can do this with port-based VLAN or tagged static VLAN with fixed port
members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 37 Initial Setup Network Example: VLAN