Chapter 5. Configuration Menu
5-16 ESU 120e User Manual 61200420L1-1
Scroll to select the port which is dependent on the
installed option card. Press Enter to complete the
selection and move the cursor back to the TS0
field.With the cursor on the TS0 field, the TS0 number
can be incremented or decremented by scrolling. If
Copy is pressed, the contents of the last TS0 entered
are placed in the new TS0 number.When all entries
are complete, Cancel moves the cursor to the last of
the submenu choices, 6)APPLY. Either apply the
newly created TS0 map or press Cancel to return to
the TS0 Map A (B) submenu choices.
Selecting Apply will not disrupt the operation of
unmodified ports
REVIEW MAP
A(B)
Permits a quick review of the number of TS0s
assigned to each port and the number of unassigned
TS0s (Idle or TST) as defined in the currently applied
Map A(B).
REVIEW TEMP This menu item is operated the same for the TEMP
map as is 3)REVIEW MAP A or Map B.
EDIT TEMP The map in the TEMP file can be edited to whatever
configuration is desired. If Map A had been copied
into the TEMP file, then after editing, the TEMP file
could be applied to MAP A or MAP B. The menu
operation is identical to 2) CREATE TEMP with the
exception that the existing port selections display.
APPLY TEMP > A Writes the TEMP map into Map A. Apply is usually
the last step in updating a map and is accessed
automatically at the end of editing or creating a
temporary map. Currently, it can be bypassed by
selecting another menu choice.
Menu Item Description
