Common Systems Connection Standards AT&T Services, Inc
Date: August 31, 2007 ATT-TP-76450, Issue 9
Copyright ©2004 – 2006, AT&T Knowledge Ventures
All rights reserved
Page 28
3.2 Primary and Secondary Interfaces
3.3 Clock Output Lead Cabling
3.4
Redundancy of timing inputs
3.5 Output Card Exhaustion
4 ALARM STANDARDS
4.1 Equipment surveillance is performed at two levels, remote
surveillance and local surveillance
4.2 Local and Telemetry Alarms
4.3 Separation of Local Alarms
4.4 Audible Alarm Cut-off (ACO)
4.5 Telemetry Alarm Protocols
4.6 Alarm Interconnection
4.7 Discrete Alarm Rating
4.8 Open Discrete Alarm Outputs
4.9 Discrete Alarm Paired Leads
4.10 Discrete Alarm Dry Contacts
4.11 Housekeeping/Overhead Alarm Inputs
5 FIBER
5.1 Fiber Optic Cable
5.2 Optical Cable/ Jumpers & Connectors
5.3 Fiber Attenuators
5.4 Fiber Connector Boots
5.5 Fiber Minimum Bend Radius
5.6 Maximum Fiber Connector Length
5.7 Minimum Distance Between Connector Housing & 90 degree bend
5.8 Space Between Door /Panel and Fiber Connector
5.9 Standard Fiber Connector
5.10 Alternative FTTP Fiber Connector
5.11 FiberOptic Cable Mode
5.12 Fiber Transmission Material
5.13 Maximum Optical Power Levels
5.14 Passive Network Element WDM Modules Placed in FDF
5.15 FiberFrames/Bays & Panels for all Network Elements
5.16 Fiber Raceway
6 COPPER CABLE
6.1
DS3/STS-1 Connector & Cabling BNC Connector
6.2
Alternative DSC/STS-1 Connector
6.3 Coaxial Stripping Tools and Crimping Tools
6.4 DS1 Cross-Connect Wire
6.5 DSL Cross-Connect Wire
6.6 Electrical Ethernet Cabling
6.7 Electrical Jumper (Cross-Connect) – Standards
6.8 Data Patch Panels -
6.9 Media Converter
6.10
Central Office Copper Wire and Cable Flammability Ratings
