Common Systems Connection Standards AT&T Services, Inc
Date: August 31, 2007 ATT-TP-76450, Issue 9
Copyright ©2004 – 2006, AT&T Knowledge Ventures
All rights reserved
Page 29
6.11
Central Office Copper Wire and Cable
6.12
Central Office Copper Coaxial Cable
6.13
Central Office Copper "Bits" Synchronous Timing Cables
6.14
Central Office Copper Wire and Cable Minimum Inside Bend Radius
6.15
Central Office Copper Coaxial Cable Minimum Inside Bend Radius
6.16
Copper Cable Terminations
6.17 Cable Trays
6.18 Tie Bar
6.19
Use of "Y" Cable
6.20 Unusual Cable Types
6.21 Protection of Cable and Jumpers
7 VENDOR DOCUMENTATION
7.1 Softcopy Documentation
7.2 Hardcopy Documentation on Request
7.3 Craft Interface Instructions
7.4 Installation Guide: installation, provisioning, and testing of the
network element
7.5
Installation Guide: Creation, provisioning, and testing of a multi-node
ring or system
7.6 Alarm/Trouble Shooting Guide
7.7 Personnel Injury and Equipment Damage Warnings
7.8 Reference Guide
7.9 Consistent terminology throughout Documentation
7.10 Consistent terminology between Documentation & Platform
7.11 Revisions Numbering
7.12 Revision History
7.13.
Documentation Submitted for Review
7.13.1 Excerpts from Documentation
7.13.2 List of Documentation
8 OTHER INTERCONNECTION REQUIREMENTS
8.1 Equipment Lighting
8.2 Test (Streaker) Card Standards
“Part” & “N/A” Footnotes:
Rqmt# Comment
