Ports Navigation Tree
otp_login_authentication=
ppp_connection=
ppp|pap_authentication=
Command Summary
set_cas
Editsthe command to configure alist of serialports with the CAS pro-
file.Syntax:set_cas<serialport number>, <serialport number> This
command hasfivesub-nodes: physical, cas, data_buffering, alertsand
power.
set_dial_in
Editsthe command to configure one serialport with the Dial-In profile.
Syntax:set_dialin<serialport number>
set_power
Editsthe command to configure alist of serialports with the Power pro-
file.Syntax:set_power<serialport number>, [<serialport number>]
Thisedit hastwo sub-nodes: physicaland power.
clone_ports
Copiesthe configuration from one port toa list of serialports. Syntax:
clone_ports<serialport number>
reset_port_to_factory
Resetsthe serialports to factory configuration. (Thisisdisabled for
CAS profile.) Syntax: reset_port_to_factory<serialport number>,
[<serialport number>]
enable_ports
Enablesserialports. Syntax:enable_ports<serialport number>,
[<serialport number>]
disable_ports
Disablesserialports. Syntax:disable_ports<serialport number>,
[<serialport number>]
Table 4.14: Serial Port Commands
Example of how to set a list of serial ports 2,5 and 6 with the CAS Profile and enable
the status:
--:- serial_ports cli-> cd /ports/serial_ports
--:- serial_ports cli-> set_cas 2,5,6
--:#- [serial_ports/physical] cli-> set status=enabled
--:#- [serial_ports/physical] cli-> show
Selected items: 2|5|6
Port: 2
enable_cisco_rj45_pin-out = no
42 Cyclades™ ACS6000 Advanced Console Server Command Reference Guide
