Option 0Option 2
Option 1Option 1
Option 2Option 2
33
If you connect a compatible
Bang & Olufsen audio system to
the television using a Master Link
cable, you obtain the benets of
an integrated audio/video system.
Play a CD on your audio system
using speakers connected to the
television, or switch on a TV
programme and send the sound
to your audio system speakers.
Your AV system can be placed
together in one room or in two
rooms with the television placed
in one room and the audio
system with a set of speakers
placed in another.
If you want to use Master Link to
integrate your audio/video system,
you must set POWER SAVING to OFF,
see page 26.
Not all Bang & Olufsen audio systems
support integration with the television.
Connect and operate an audio system
Using a BeoLink cable, connect the
sockets marked MASTERLINK on the
television and the audio system.
Program the AV setup with Beo4
You can set your television, placed in an
AV-system, to the correct Option using
Beo4. Switch the entire system to
standby rst.
Option setting for the television…
> While holding the • button (standby) on
Beo4, press LIST.
> Let go of both buttons.
> Use the navigation button up or down to
bring up OPTION? in the Beo4 display and
press the centre button.
> Use the navigation button to bring up
V.OPT in the Beo4 display and then enter
the appropriate number (1, 2,4, 5or 6).
Option setting for the audio system…
> While holding the • button (standby) on
Beo4, press LIST.
> Let go of both buttons.
> Use the navigation button up or down to
bring up OPTION? in the Beo4 display and
press the centre button.
> Use the navigation button up or down to
bring up A.OPT in the Beo4 display and
enter the appropriate number (0, 1, 2,4,
5or 6).
If the television and an audio system is set
up in one room with all speakers connected
to the television, set the television to Option2
and the audio system to Option 0.
If the television (with or without additional
speakers) and the audio system (with a
connected set of speakers) are set up in the
same room, set the television to Option1
and the audio system to Option1.
If the audio system is set up in one room,
and the television (with or without additional
speakers) in another, set the television to
Option2 and the audio system to Option2.
Connect your audio system to the television
