5
MENU LANGUAGE… You can select the
language for on-screen menus. The text
on the screen changes as you move from
language to language.
STAND ADJUSTMENT … Set the maximum
angle for turn of the television. Use and
to turn the television and limit the
movement of the stand.
STAND POSITIONS … Set your preferred
preset positions for the television. For
further information about the STAND
POSITIONS menu, see page7.
STANDBY SETTINGS … The television can be
set to switch itself to standby after some
time with no operation. You can also switch
Power Saving on or off, see page26.
CONNECTIONS … Select the type of
equipment you have connected to each
socket group, the sockets used, the
product name, and the source name. For
further information about the
CONNECTIONS menu, see page8.
SPEAKER TYPE… Select which speakers are
connected to the television, if any. See
page15–16 for further information.
SPEAKER DISTANCE… In this menu, you
select the distance in metres to each of
the speakers in your setup. See page17
for further information.
SPEAKER LEVEL… In this menu, you can
adjust the volume level of each speaker in
your setup. See page18 for further
information.
ADJUSTMENT… Adjust bass, volume, treble,
etc.
For information about where to connect
extra equipment, see the chapter about
connection panels in Getting Started.
First-time setup
The setup procedure is activated
when the television is connected
to the mains and switched on for
the rst time. You are led
through an automatic series of
on-screen menus in which you
must set up the TV and register
the extra equipment you have
connected, such as loud speakers.
If you change your setup at a later
date,
you can access the same
menus and update your settings.
The sequence of menus in rst-time setup
