MASTER
LINK
AV2MASTER
LINK
RF OUT
Option 6*
36
The BeoLink system makes it
possible to distribute picture
and/or sound to other rooms
throughout the house.
For example, you can connect
your television in the living room
to another video system or set of
speakers in another room,
thereby making it possible to
distribute the picture or sound to
other rooms.
If you have a BeoLink distribution
system installed, you can either
use your television in the main
room, such as a living room, or
in a link room, such as a study or
bedroom.
To distribute video signals to link
rooms, it is necessary to connect
a non-Bang& Olufsen link tuner
to the link room.
Distribute sound and picture with BeoLink
Link connections
The main room television must be
connected to the link room system with
a Master Link cable and a non-Bang&
Olufsen link tuner:
> Connect the Master Link cable to the
socket marked MASTER LINK on the
television.
> If you want to distribute video signals as
well (not supported for BeoVision10
products), connect an ordinary aerial cable
to the socket marked RF OUT on the
television. Then run the aerial cable to the
link tuner and the Master Link cable to the
link room.
If an audio system is already connected to
the Master Link socket and you wish to
connect more equipment, the Master Link
cable must be split in two and joined with
the cable from the link room using a special
junction box. Contact your Bang & Olufsen
retailer for assistance.
HDMI, VGA and Y–Pb–Pr signals cannot be
distributed from a main room television to
the link room system.
If you set the POWER SAVING to ON, you
cannot activate the television or its source
from your link room, while the main room
television is in standby.
Main room
Link room
Link tuner
Option 1 or 2
